Microwire Brush Array

Contact Person’s Name:

Contact Person’s Email:

Contact Person’s Telephone:

Institution Name:

Institution City and Country:

Principal Investigator’s Name

Name on Quote (if not contact person):

GENERAL SPECIFICATIONS

Layout

a. Length of the Microfil Tube (2.5 to 120 mm max)
b. Microwire contact size (determined by the selection of wire diameter)
c. Distance of the microwires extended beyond Microfil Tube (5 mm max).
n. Total # of recording wires & reference
X. Diameter of the Microfil Tube (refer to the Table 1)
L. Length of the Flexible cable

Table 1: Microfil tube sizes for different numbers of 12.5µm wires
Outer Diameter	Microfil Size	Number of wires
For more information of different wire diameters and combinations, please contact us at support@spikeneuro.com
350 µm	28 gauge	16 - 32
430 µm	26 gauge	33 - 64
665 µm	23 gauge	65 - 96

DESIGN SPECIFICATIONS

Metal type and electrode site diameter

Include Polyimide tubing other yes

n: Total number of microwires

a: Length of the Microfil tube

Impedance value: 0.5 to 0.8 MΩ

c: Length of the wires extended beyond Microfil

L: Would you like a flexible cable between the MBA shaft and connector, or for the connector to be mounted to the shaft top directly?

Flexible Cable
Direct Mount

Specify flexible cable length

Specify flexible cable orientation

Flexible cable straight
Flexible cable 90 degree

Specify connector orientation at cable end

Straight
90 degree

Specify connector orientation at shaft end

Straight
90 degree

Will your array need more than one connector?

Yes
No

Does each connector require its own reference and/or ground?

Would you like the connectors to be cemented together of freely hanging separate?

Would you like the connectors to be aligned or fanned?

Aligned
Fanned

Would you like the connectors spaced a specific distance from each other?

Yes
No

Specify edge to edge spacing distance

How would you like the tip to be cut?

Flat Cut
Angled Cut

Do you need the tip microwires to be pre-splayed?

Yes
No

Ref: Include a Reference connection?

Gnd: Include external Ground connection?

Gnd: yes

Gnd: other

CONNECTOR AND HEADSTAGE

Connector(s), Please select one

Indicate desired connector

Provide us with the brand and model of your recording and/or stimulation system

RECORDING CHANNEL PINOUT

Layout

To ensure your complete satisfaction, MicroProbes for Life Science will provide a photograph and copy of the pin layout mapping and corresponding microelectrodes, including reference and ground, with your shipped order. Connector pin assignments will reflect connector pin numbers NOT headstage channel numbers

YOUR CUSTOM DESIGN AND LAYOUT SHEET

If your requested design cannot be fully described by the questions above, please attach a description here. Make drawing as clear as possible:

Upload a file:

Click or drag files to this area to upload. You can upload up to 5 files.

ACCESSORIES AND ADDITIONAL SERVICES

Do you require product pre-sterilization?

Yes
No

(Sterilization (ethylene oxide gas) will be performed by a third party and requires an additional fee to cover process, packaging, and shipping. Typical fee is $850 USD per batch. Process is not validated for human use.)

APPLICATION DESCRIPTION (OPTIONAL)

Animal Model / Application:

Implant Location / Usage Description:

Layout

Acute or Chronic Use:

Functionality

ABOUT YOUR ORDER

How many of this MBA design do you wish to order?

The following questions can help our sales team assist you in optimal probe selection and design

Delivery options

Standard 6 weeks delivery
Rush order

Special requirements